90 Degree FB Pressed Bend, flanged ends

Nordfab FB Ducting features a flat edge on the connecting ends. This 90° FB Pressed Bend is connected to other duct components using the FLI type flanges retained by the flat edge on each end. The loose flanges allow rotation for ease of installation.

FB Bends are also available in 60°, 45°, 30°, and 15° angles.

- Galvanised steel construction with steel thickness 0,9 mm
- Radius = 1.5 x D
- Available in sizes Ø 80-315 mm, see article numbers below

The FB Duct System is used in dust collection / process ventilation systems in a wide variety of industries.

ORDER EXAMPLE:
Bend Pressed Galv 0,9mm 315FLI 90Deg R=1,5

ø A (mm) Angle degree Center line radius Material T mm Weight(kg) Legacy Item No. Item No.
80 90 1.5 Galv 0,9mm 1,53 BSFA-080-90‍ 8210002500‍
100 90 1.5 Galv 0,9mm 1,43 BSFA-100-90‍ 8210002505‍
120 90 1.5 Galv 0,9mm 1,76 BSFA-120-90‍ 8210002510‍
125 90 1.5 Galv 0,9mm 1,76 BSFA-125-90‍ 8210002515‍
140 90 1.5 Galv 0,9mm 2,02 BSFA-140-90‍ 8210002520‍
150 90 1.5 Galv 0,9mm 2,10 BSFA-150-90‍ 8210002525‍
160 90 1.5 Galv 0,9mm 2,10 BSFA-160-90‍ 8210002530‍
180 90 1.5 Galv 0,9mm 2,39 BSFA-180-90‍ 8210002535‍
200 90 1.5 Galv 0,9mm 4,24 BSFA-200-90‍ 8210002540‍
225 90 1.5 Galv 0,9mm 4,80 BSFA-225-90‍ 8210002545‍
250 90 1.5 Galv 0,9mm 5,36 BSFA-250-90‍ 8210002550‍
300 90 1.5 Galv 0,9mm 7,50 BSFA-300-90‍ 8210002555‍
315 90 1.5 Galv 0,9mm 7,87 BSFA-315-90‍ 8210002560‍

Contact Nordfab Europe

+45 86 47 11 00 - [email protected]

It looks like you're coming from United States.

Would you like to go to the United States site?