QF In Line Spark Trap

Installed in ducting as part of a dust collection system, the Nordfab In-line Spark Trap greatly reduces the possibility of fire in cyclones / collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork.

No moving parts and no power required for operation. Minimal pressure loss.

Can quickly and easily be mounted into Quick-Fit® ducting systems, or other duct systems with use of a Nordfab adapter, and the trap can easily be removed for cleanout. Available with flanged ends.

Calibration or other assistance from a factory technician is not required.

This is a simple, low-cost tool that can reduce incidents of fire events, reducing costs and disruption and improving safety. System redundancy and complementary measures should be applied.

• Available in Galvanized and 304SS (as shown below) or optional 316SS or carbon steel
• Available with flanged ends in diameters up to 24", and other various end types
• Optional gauges 20 and 18

Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options.

ø A in Material T mm Length (in) Weight (lbs) Legacy Art. Nr. Art. No.
4 Galv 22ga 3255-0400-100000‍ 8010004495‍
5 Galv 22ga 3255-0500-100000‍ 8010004497‍
6 Galv 22ga 3255-0600-100000‍ 8010004499‍
7 Galv 22ga 3255-0700-100000‍ 8010004501‍
8 Galv 22ga 3255-0800-100000‍ 8010004503‍
9 Galv 22ga 3255-0900-100000‍ 8010004505‍
10 Galv 22ga 3255-1000-100000‍ 8010004490‍
12 Galv 22ga 3255-1200-100000‍ 8010004492‍
4 304SS 22ga 3255-0400-200000‍ 8010004456‍
5 304SS 22ga 3255-0500-200000‍ 8010004458‍
6 304SS 22ga 3255-0600-200000‍ 8010004460‍
7 304SS 22ga 3255-0700-200000‍ 8010004462‍
8 304SS 22ga 3255-0800-200000‍ 8010004464‍
9 304SS 22ga 3255-0900-200000‍ 8010004466‍
10 304SS 22ga 3255-1000-200000‍ 8010004452‍
12 304SS 22ga 3255-1200-200000‍ 8010004454‍

Get in touch

Contact Nordfab Americas