Quick-Fit® Pipe & Clamps

Straight duct and clamps for use in process ventilation / dust collection systems, including QF® Pipe, Quick-Fit® Sleeves, QF Clamps, and O-rings.

Quick-Fit® Pipe clamps together for fast, easy installation. ø3" - 24". Galvanized or 304SS construction. Standard gauges 22ga & 20ga.

Quick-Fit® Sleeve

Telescoping Quick-Fit® Sleeve allows fast, easy installation of QF clamp-together ducting. ø3" - 24". Galvanized or 304SS construction. Standard gauges 22ga and 20ga.

Quick-Fit Clamp with Pin

The QF® Clamp is used to quickly and easily connect QF ductwork. ø3" - 24". Galvanized steel or 304SS construction. Standard nitrile seal.

QF Pipe 18 Gauge

Quick-Fit® Pipe clamps together for fast, easy installation. ø4" - 24". 18 gauge galvanized steel or 304SS construction.

Quick-Fit® Sleeve 18 Gauge

Telescoping Quick-Fit® Sleeve allows fast, easy installation of QF clamp-together ducting. ø3" - 24". 18 gauge galvanized or 304SS construction.

QF Pipe 16 Gauge

Quick-Fit® Pipe clamps together for fast, easy installation. ø8" - 24". 16 gauge galvanized steel or 304SS construction.

Quick-Fit® Sleeve Assembly 18ga

The 16ga Quick-Fit Sleeve Assembly includes 16 gauge cut pipe, QF Clamp, and 18 gauge Quick-Fit Sleeve with black O-ring. The Sleeve Assembly is used to provide variable length adjustment. The raw end can be trimmed during installation to complete duct spans less than 5 feet in length.

QF Pipe 14 Gauge

Quick-Fit® Pipe clamps together for fast, easy installation. ø8" - 24". Heavy duty 14 gauge galvanized steel construction.

Quick-Fit® Sleeve Assembly 14ga

The 14ga Quick-Fit Sleeve Assembly includes 14 gauge cut pipe, QF Clamp, and an 8.5" long custom Quick-Fit Sleeve with black O-ring. Used to provide variable length adjustment. The raw end can be trimmed during installation to complete duct spans less than 5 feet in length.

Quick-Fit Clamp with Pin and Silicone Seal

The QF® Clamp is used to quickly and easily connect QF ductwork. Silicone seal can be applied in higher temperature applications. ø3" - 24". Galvanized steel or 304SS.

Quick-Fit Clamp with Pin and ePTFE Seal

The QF® Clamp is used to quickly and easily connect QF ductwork. ePTFE seals are not degraded by any common chemicals. ø3" - 24". Galvanized steel or 304SS.

Nitrile O-Ring for Quick-Fit Sleeve

Replacement O-ring for Quick-Fit Sleeve. ø3" - 24". Black Nitrile.

Silicone O-Ring for Quick-Fit Sleeve

Replacement O-ring for Quick-Fit Sleeve. ø3" - 24". Red silicone.

Additional Clamp Pins

Additional / replacement pins for the Quick-Fit Clamp.

Additional Clamp Seals

Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE.

Get in touch

Contact Nordfab Americas