90 Degree FB Pressed Bend, 6mm edge ends

Nordfab FB Ducting features a flat edge on the connecting ends. This FB 90° Pressed Bend is easily connected to other duct components using FB Clips which can be secured around the 6mm flat edge on each end.

FB Bends are also available in 60°, 45°, 30°, and 15° angles.

- Galvanised steel construction with steel thickness 0,9 mm
- Radius = 1.5 x D
- Available in sizes Ø 80-315 mm, see article numbers below

The FB Duct System is used in dust collection / process ventilation systems in a wide variety of industries.

ORDER EXAMPLE:
Bend Pressed Galv 0,9mm 120FB 90Deg R=1,5

ø A (mm) Angle degree Center line radius Material T mm Weight(kg) Legacy Item No. Item No.
80 90 1.5 Galv 0,9mm 0,40 BSAA-080-90‍ 8210002893‍
100 90 1.5 Galv 0,9mm 0,50 BSAA-100-90‍ 8210002898‍
120 90 1.5 Galv 0,9mm 0,80 BSAA-120-90‍ 8210002903‍
125 90 1.5 Galv 0,9mm 0,80 BSAA-125-90‍ 8210002908‍
140 90 1.5 Galv 0,9mm 1,00 BSAA-140-90‍ 8210002913‍
150 90 1.5 Galv 0,9mm 1,10 BSAA-150-90‍ 8210002918‍
160 90 1.5 Galv 0,9mm 1,20 BSAA-160-90‍ 8210002923‍
180 90 1.5 Galv 0,9mm 1,60 BSAA-180-90‍ 8210002928‍
200 90 1.5 Galv 0,9mm 1,90 BSAA-200-90‍ 8210002933‍
220 90 1.5 Galv 0,9mm 2,40 BSAA-220-90‍ 8210002937‍
225 90 1.5 Galv 0,9mm 2,40 BSAA-225-90‍ 8210002942‍
250 90 1.5 Galv 0,9mm 3,00 BSAA-250-90‍ 8210002947‍
300 90 1.5 Galv 0,9mm 3,20 BSAA-300-90‍ 8210002957‍
315 90 1.5 Galv 0,9mm 5,00 BSAA-315-90‍ 8210002962‍

Contact Nordfab Europe

+45 86 47 11 00 - [email protected]

It looks like you're coming from United States.

Would you like to go to the United States site?