Straight duct, clips, and gaskets to be used in process ventilation, dust collection, and fume extraction systems. Comes with pre-drilled, loose FLI / FLN flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Idéal pour la plupart des applications de dépoussiérage le conduit à serrage rapide Quick-Fit de Nordfab peut réduire de 50 % le temps d’installation réduisant ainsi les coûts et les temps d’arrêt. Rapide et facile à installer le conduit QF est également facile à nettoyer et réutilisable en cas de réaménagement d’une installation. Les conduits sont disponibles en acier galvanisé ou en acier inoxydable.

Nordfab propose les conduits scellés QFS™ pour prévenir les fuites dans les systèmes de ventilation lorsque le brouillard et la fumée d’huile font partie des contaminants à évacuer.  Les coutures des conduits sont étanches et un calfeutrage est appliqué aux coutures/jonctions sur d’autres composants, selon les besoins.

Nordfab's Flanged bends allow airflow direction change in a run of a duct. They come with pre-drilled, loose FLI / FLN flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab's Quick-Fit Sealed (QFS) bends, pressed or segmented, allow airflow direction change in a run of a duct. They are designed for machining and any other operations which create oil mists, as they significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All bends are epoxy caulked. QFS Bends are available in galvanised and stainless steel construction,  90°, 60°, 45°, 30°, and 15° with Quick-Fit rolled ends. R = 1,5 x Ø. 

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab High Vacuum (HV) Bends are available in 45° or 90° angles and used for air contaminant collection where high vacuum and low airflow are required. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab's Mild Steel bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. The Mild Steel bends are available in 90°, 60°, 45°, 30°, and 15° angles. R= 1,5 x Ø and designed with either a 6 mm edge for easy clip connection or loose flanges. Nordfab Mild Steel ducting systems feature a 2 mm or 3 mm thick wall that can tolerate abrasive materials and are designed for challenging dust collection / ventilation applications. The Mild Steel ducting components are available with painted surface or with stainless steel construction, which is well suited for extraction in commercial kitchens. 

Can't find what  you're looking for? Contact us, and we'll be happy to help!

Nordfab High Vacuum (HV) Branches are available in standard 45° or 90° angles, and used for air contaminant collection where high vacuum and low airflow are required. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab Mild Steel branches are used to port to machine outlets or other duct lines. They are being used in process ventilation, dust collection, and fume extraction systems. Nordfab Mild Steel ducting systems feature a 2 mm or 3 mm thick wall that can tolerate abrasive materials and are designed for challenging dust collection / ventilation applications. The Mild Steel ducting components are available with painted surface or with stainless steel construction, which is well suited for extraction in commercial kitchens. 

Can't find what  you're looking for? Contact us, and we'll be happy to help!

Nordfab Flanged branches are used to port to machine outlets or other duct lines. They come with pre-drilled, loose FLI / FLN flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Idéal pour la plupart des applications de dépoussiérage,  le conduit à bride Nordfab est doté d’une bride standard de l’industrie à chaque extrémité. Les conduits sont disponibles en acier galvanisé en acier inoxydable et en acier au carbone.

Nordfab High Vacuum (HV) Adapters allow connections to machinery as well as varying sizes of ducting. They are being used for air contaminant collection where high vacuum and low airflow are required. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab's Quick-Fit (QF) bends, pressed or segmented, allow airflow direction change in a run of a duct. They are being used in process ventilation, dust collection, and fume extraction systems. Quick-Fit (QF) Bends are available in galvanised and stainless steel construction,  90°, 60°, 45°, 30°, and 15° with Quick-Fit rolled ends. R = 1,5 x Ø. 

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab Mild Steel adapters allow connections to machinery as well as ductwork with other connection types. They are being used in process ventilation, dust collection, and fume extraction systems. Nordfab Mild Steel ducting systems feature a 2 mm or 3 mm thick wall that can tolerate abrasive materials and are designed for challenging dust collection / ventilation applications. The Mild Steel ducting components are available with painted surface or with stainless steel construction, which is well suited for extraction in commercial kitchens. 

Can't find what  you're looking for? Contact us, and we'll be happy to help!

Nordfab's FB bends, pressed or segmented, allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. The FB bends are available in 90°, 60°, 45°, 30°, and 15° angles. R= 1,5 x Ø and designed with 6 mm edge for easy clip connection. The FB Clips allow for a quick installation, as they easily connects two ducting components together. 

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab High Vacuum (HV) Duct Systems are used in applications in which the high vacuum and low airflow are being used to catch, transport, and filter fumes, dust, and other particles. Connections are made using couplings which seal securely. Ductwork is available in galvanised and stainless steel construction (304SS & 316L).

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab Flanged adapters allow connections to machinery as well as ductwork with other connection types. They come with pre-drilled, loose FLI / FLN flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Branches bride à utiliser dans les systèmes de ventilation/dépoussiérage de procédé. Disponible avec des angles de 30 ou 45 °F. Disponible en diamètres jusqu'à 3 à 72 po. Calibres (épaisseur de paroi) de 22 à 10. Brides disponibles avec disposition de trous standard ou personnalisées.

Nordfab offers flexible ducting / hose and hose clamps for air contaminant collection where high vacuum and low airflow are required. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offers various diverter valves which are being used in process ventilation, dust collection, and fume extraction systems where airflow redirection is required. They can eith be automatical or manual. Nordfab Mild Steel ducting systems feature a 2 mm or 3 mm thick wall that can tolerate abrasive materials and are designed for challenging dust collection / ventilation applications. The Mild Steel ducting components are available with painted surface or with stainless steel construction, which is well suited for extraction in commercial kitchens. 

Can't find what  you're looking for? Contact us, and we'll be happy to help!

Nordfab Mild Steel ducting systems feature a 2 mm or 3 mm thick wall that can tolerate abrasive materials and are designed for challenging dust collection / ventilation applications. The Mild Steel ducting components are available with painted surface or with stainless steel construction, which is well suited for extraction in commercial kitchens. 

Can't find what  you're looking for? Contact us, and we'll be happy to help!

Branches à utiliser dans les systèmes de dépoussiérage/ventilation de procédé. Versions standards Angles 30° ou 45°. Disponibles en acier galvanisé ou inoxydable 304SS.

Nordfab Quick-Fit Sealed (QFS) dampers, manual or automatic, allow regulation of the volume of airflow through a section of ductwork. They are designed for machining and any other operations which create oil mists, as they significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All joints are epoxy caulked and when clipping the ductwork together, an additional nitrile gasket is placed between the parts to avoid leakage. 

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offers various of accessories for our Flanged ducting system. All components come with pre-drilled, loose FLI / FLN flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offers Dampers for use in High Vacuum (HV) Ducting Systems. Manual or Automatic Dampers allow regulation of the volume of airflow through a section of ductwork. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential. Nordfab Flanged Ducting features an industry standard flange on the ends (FLI or FLN) and is available in galvanized or stainless steel. 

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offer various installation products for ducting systems being used in process ventilation, dust collection, and fume extraction systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offers flexible ducting / hose and hose clamps for use in  process ventilation, dust collection, and fume extraction systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Adaptateurs de conduits à serrage rapide QF ou à bride destinés aux systèmes de ventilation/dépoussiérage de procédé. Les adaptateurs permettent de raccorder des conduits à des machines.

Adaptateurs bride for use in process ventilation / dust collection systems. Disponible en diamètres jusqu'à 3 à 72 po. Calibres (épaisseur de paroi) de 22 à 10. Brides disponibles avec disposition de trous standard ou personnalisées.

Nordfab offer various installation products for High Vacuum (HV) ducting systems. The term ‘high vacuum’ refers to the high vacuum and low airflow used to catch, transport and filter fumes, dust and other particles.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab offers various installation products for Quick-Fit Sealed (QFS) ducting systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Conçu pour l’usinage ou toute autre opération qui crée des brouillards d’huile le conduit QFS de Nordfab peut réduire considérablement les risques de fuite dans les conduits. QFS comprend un conduit soudé au laser et calfeutré (les coutures pleines éliminent les fuites) et une double-étanchéité au niveau des raccords. Les conduits sont disponibles en acier galvanisé ou en acier inoxydable.

Nordfab Quick-Fit (QF) dampers, manual or automatic, allow regulation of the volume of airflow through a section of ductwork. They are being used in process ventilation, dust collection, and fume extraction systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Nordfab FB dampers, manual or automatic, allow regulation of the volume of airflow through a section of ductwork. They are being used in process ventilation, dust collection, and fume extraction systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Hottes de captation et transitions de conduits rectangulaires à ronds destinées aux systèmes de ventilation/dépoussiérage de procédé. Les hottes permettent d’effectuer une captation locale à la source.

Nordfab FB suction hood is an adaptor which allows the attachment of multiple hose attachments. They are being used in process ventilation, dust collection, and fume extraction systems.

Can't find what you're looking for? Contact us, and we'll be happy to help!

Conduits flexibles/tuyaux et colliers de serrage  destinés aux systèmes de ventilation et dépoussiérage de procédé.

Conduits en acier bride à utiliser dans les systèmes de ventilation/dépoussiérage de procédé. Assemblies are Rigid Flex Steel or Ultra Flex Steel Hose with welded flange ends. Flanges available with industry standard or custom hole patterns. Diamètres jusqu'à 3 à 14 po. Acier galvanisé ou inoxydable 304SS

Vannes de dérivation Quick-Fit utilisées dans les systèmes de conduits de ventilation/dépoussiérage de procédé pour rediriger le flux d’air. Vannes automatiques ou manuelles.

Produits de suspension et d’installation destinés aux systèmes de ventilation/dépoussiérage de procédé. En savoir plus sur les options de suspension de conduit disponibles.

Accessoires bride for use in process ventilation / dust collection systems. Brides disponibles avec disposition de trous standard ou personnalisées.

Accessoires de conduits à serrage rapide Quick-Fit destinés aux systèmes de ventilation/dépoussiérage de procédé.

The QFS Clip allows quick, easy assembly of QFS ductwork. Gasket and O-Rings provide protection against leakage where sealed systems are needed. Galvanised steel or 304SS, with nitrile or silicone seals. Overlapping design.

Nordfab's Quick-Fit Sealed (QFS) Clips allow quick and easy connection during installation as well as subsequent removal and re-use of QFS components. The internal gasket guarantees a tight joint. QFS Clips are supplied with a duct end gasket to further minimize leakage. 

Technical Data
• General purpose oil resistant polymer
• Performs well with many oil, water and hydraulic fluid applications
• Good tear resistance
• Should not be used with solvents such as acetone, MEK, ozone, chlorinated hydrocarbons, and nitro hydrocarbons
• Conducts electricity
• Classification:1. ASTM D-2000 M2BG510 A24 B34 EO14 EO34 EF11 EF21
• Temperature range: -34° C to +107°C / intermittent: +138° C

Quick-Fit Sealed (QFS) Ducting
Designed for machining and any other operations which create oil mists, Nordfab Quick-Fit Sealed (QFS) Ducting can significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All bends, branches, reducers, and other products with joints or collars are epoxy caulked. When clipping the ductwork together, an additional nitrile gasket is placed between the parts to avoid leakage. The Quick-Fit Clip features a generously dimensioned sealing gasket held firmly in place by positive over-centre clamping action over the rolled collars at the duct ends to be joined. For added security, a locking pin may be inserted.

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit Sealed (QFS) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit Sealed is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Sealed Clip when installing, extending, or taking apart runs of duct.

Nordfab Quick-Fit (QF) ducting in 1,25 mm steel thickness and 2 meters length of duct is designed for heavy duty applications. It is available in galvanised steel and ranges from 100 - 710 mm in diameter.

The solid welds on Nordfab's welded (W) Quick-Fit duct (Ø80-400 mm) prevent leakage, saving energy costs. Diameters above 400 mm are manufactured with a lockformed seam.

Quick-Fit Sealed (QFS) Ducting
When used for machining and any other operations which create oil mists, Nordfab Quick-Fit ducting can be used with added epoxy caulked and double sealing at connections.  Nordfab Quick-Fit Sealed (QFS) significantly reduce risks of leakage from ducting. 

The world's fastest ducting just became even faster
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. The 2-meter duct provides a more efficient way to plan ducting, using less pieces and fewer joins. In other words, the world's fastest ducting just became even faster!

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.

QFS Gaskets are applied to duct ends where QFS ductwork will be clipped together, providing an extra tight seal, preventing leakage of oil mists and coolants. Ø80 - 400 mm.

Nordfab's Quick-Fit Sealed (QFS) Gasket is applied to duct ends where QFS ductwork will be clipped together. The Gasket provides an extra tight seal, preventing leakage of oil mists and coolants. No adhesive is needed, it fits snugly around rolled edge at end of QFS duct. The gasket is designed to perform well in many oil, water and hydraulic fluid applications. Should not be used with solvents such as acetone, MEK, ozone, chlorinated hydrocarbons, and nitro hydrocarbons. 

Quick-Fit Sealed (QFS) Ducting
Designed for machining and any other operations which create oil mists, Nordfab Quick-Fit Sealed (QFS) Ducting can significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All bends, branches, reducers, and other products with joints or collars are epoxy caulked. When clipping the ductwork together, an additional nitrile gasket is placed between the parts to avoid leakage. The Quick-Fit Clip features a generously dimensioned sealing gasket held firmly in place by positive over-centre clamping action over the rolled collars at the duct ends to be joined. For added security, a locking pin may be inserted.

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit Sealed (QFS) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit Sealed is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Sealed Clip when installing, extending, or taking apart runs of duct.

Nordfab Quick-Fit (QF) ducting in 1 meter length of duct is available in galvanised steel and stainless steel, ranging from 80 - 710 mm in diameter, with a steel thickness ranging from 0,7 - 0,9 mm.

The solid welds on Nordfab's welded (W) Quick-Fit duct (Ø80-400 mm) prevent leakage, saving energy costs. Diameters above 400 mm are manufactured with a lockformed seam. 

Quick-Fit Sealed (QFS) Ducting
When used for machining and any other operations which create oil mists, Nordfab Quick-Fit ducting can be used with added epoxy caulked and double sealing at connections.  Nordfab Quick-Fit Sealed (QFS) significantly reduce risks of leakage from ducting. 

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.

Nordfab Quick-Fit (QF) ducting in 2 meters length of duct is available in galvanised steel and stainless steel, ranging from 80 - 710 mm in diameter, with a steel thickness ranging from 0,7 - 0,9 mm.

The solid welds on Nordfab's welded (W) Quick-Fit duct (Ø80-400 mm) prevent leakage, saving energy costs. Diameters above 400 mm are manufactured with a lockformed seam.

The world's fastest ducting just became even faster
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. The 2-meter duct provides a more efficient way to plan ducting, using less pieces and fewer joins. In other words, the world's fastest ducting just became even faster!

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.

Nordfab Quick-Fit (QF/QFS) ducting in 1,5 meters length of duct is available in galvanised steel and stainless steel, ranging from 80 - 710 mm in diameter, with a steel thickness ranging from 0,7 - 0,9 mm.

The solid welds on Nordfab's welded (W) Quick-Fit duct (Ø80-400 mm) prevent leakage, saving energy costs. Diameters above 400 mm are manufactured with a lockformed seam.

Quick-Fit Sealed (QFS) Ducting
When used for machining and any other operations which create oil mists, Nordfab Quick-Fit ducting can be used with added epoxy caulked and double sealing at connections.  Nordfab Quick-Fit Sealed (QFS) significantly reduce risks of leakage from ducting. 

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.

This is a replacement O-Ring used on QFS Slip Duct.

Quick-Fit Sealed (QFS) Ducting
Designed for machining and any other operations which create oil mists, Nordfab Quick-Fit Sealed (QFS) Ducting can significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All bends, branches, reducers, and other products with joints or collars are epoxy caulked. When clipping the ductwork together, an additional nitrile gasket is placed between the parts to avoid leakage. The Quick-Fit Clip features a generoursly dimensioned sealing gasket held firmly in place by positive over-centre clamping action over the rolled collars at the duct ends to be joined. For added security, a locking pin may be inserted.

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit Sealed (QFS) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit Sealed is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Sealed Clip when installing, extending, or taking apart runs of duct.

Telescopic QF Slip Duct allows quick, easy installation of QF and QFS ducting. Gasket provides protection against leakage where sealed systems are needed. Ø80 - 400 mm, galvanised steel construction.

The Quick-Fit Sealed (QFS) Slip Duct is used to provide variable length adjustment of a QFS ducting system by eliminating precise measurements. 

QFS Slip Duct Kit includes:
- (1) Slip Duct 
- (1) pcs. QFS Clip
- (2) pcs. O-rings
- (1) Duct End Gasket

Quick-Fit Sealed (QFS) Ducting
Designed for machining and any other operations which create oil mists, Nordfab Quick-Fit Sealed (QFS) Ducting can significantly reduce risks of leakage from ducting. QFS features laser welded and caulked duct (solid seams eliminate leakage) and double sealing at duct connections. All bends, branches, reducers, and other products with joints or collars are epoxy caulked. When clipping the ductwork together, an additional nitrile gasket is placed between the parts to avoid leakage. The Quick-Fit Clip features a generoursly dimensioned sealing gasket held firmly in place by positive over-centre clamping action over the rolled collars at the duct ends to be joined. For added security, a locking pin may be inserted.

The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit Sealed (QFS) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime. 

Easy to install
Quick-Fit Sealed is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Sealed Clip when installing, extending, or taking apart runs of duct.

Duct & Clips

QFS Clip Premium, Kit with Gasket

1,25mm Quick-Fit (QF/QFS) Duct, 2 meter length

QFS Gasket

Quick-Fit (QF/QFS) Duct, 1 meter length

Quick-Fit (QF) Duct, 2 meter length

Quick-Fit (QF/QFS) Duct, Length =1,5m

QFS O-Ring

Quick-Fit Sealed (QFS) Slip Duct Kit