Installed in ductwork as part of a dust collection system, the Nordfab Quick-Fit (QF) Ball Joint allows an average of 26° movement off-center. The movement allows flexibility in the duct, allowing it to rotate in all directions. The ball joint's use a similar to that of a QF Bend but a bend has a set angle and direction whereas a ball joint has 360° directional capability and an angle average 26°, depending on the applications. It is available in Alu Steel (DX54D+AS), ranging from 100 - 300 mm in diameter.
The world's fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime.
Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.
Click on the video to view a demonstration of the swivel movement that allows flexibility in the duct, allowing it to rotate in all directions.
| ø A (mm) | Material | T mm | L mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|
| 100 | Alu Steel (DX54D+AS) | 1.2 | 325 | 0.6 | 8210002216 |
| 125 | Alu Steel (DX54D+AS) | 1.2 | 310 | 0.7 | 8210002217 |
| 150 | Alu Steel (DX54D+AS) | 1.2 | 300 | 1.1 | 8210002218 |
| 160 | Alu Steel (DX54D+AS) | 1.2 | 300 | 1.1 | 8210008778 |
| 200 | Alu Steel (DX54D+AS) | 1.2 | 375 | 5 | 8210002220 |
| 250 | Alu Steel (DX54D+AS) | 1.2 | 380 | 2.3 | 8210002222 |
| 300 | Alu Steel (DX54D+AS) | 1.2 | 490 | 3.3 | 8210002223 |
It looks like you're coming from United States.
Would you like to go to the United States site?