Nordfab FLI Flanged Segmented Bend (90°) comes with pre-drilled, loose FLI flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab's FLI Flanged Segmented Bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. Available in galvanised steel construction, ranging from 600 mm to 950 mm in diameter.
- Also available in 60°, 45°, 30° and 15° angles.
- Radius = 1.5 x D
- Available in sizes Ø 350 mm - 1000 mm, see item numbers below
Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.
| ø A (mm) | Angle degree | Center line radius | Material | T mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|---|
| 350 | 90 | 1.5 | Galv | 0,9mm | 9,46 | 8210002565 |
| 400 | 90 | 1.5 | Galv | 0,9mm | 13,05 | 8210002570 |
| 450 | 90 | 1.5 | Galv | 0,9mm | 15,9 | 8210002575 |
| 500 | 90 | 1.5 | Galv | 0,9mm | 18,87 | 8210002580 |
| 550 | 90 | 1.5 | Galv | 0,9mm | 24,1 | 8210002585 |
| 600 | 90 | 1.5 | Galv | 0,9mm | 29 | 8210002590 |
| 630 | 90 | 1.5 | Galv | 0,9mm | 29,54 | 8210002595 |
| 650 | 90 | 1.5 | Galv | 0,9mm | 30,43 | 8210002600 |
| 700 | 90 | 1.5 | Galv | 0,9mm | 37,12 | 8210002605 |
| 710 | 90 | 1.5 | Galv | 0,9mm | 39,72 | 8210002610 |
| 750 | 90 | 1.5 | Galv | 0,9mm | 39,72 | 8210002615 |
| 800 | 90 | 1.5 | Galv | 0,9mm | 47,96 | 8210002620 |
| 850 | 90 | 1.5 | Galv | 0,9mm | 51,08 | 8210002625 |
| 900 | 90 | 1.5 | Galv | 0,9mm | 59,96 | 8210002630 |
| 950 | 90 | 1.5 | Galv | 0,9mm | 63,29 | 8210002635 |
| 1000 | 90 | 1.5 | Galv | 0,9mm | 75,35 | 8210002640 |
It looks like you're coming from United States.
Would you like to go to the United States site?