Nordfab FLI Flanged Pressed Bend (90°) comes with pre-drilled, loose FLI flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab's FLI Flanged Pressed Bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. Available in galvanised steel construction, ranging from 80 mm to 315 mm in diameter.
- Also available in 60°, 45°, 30° and 15° angles.
- Radius = 1.5 x D
- Available in sizes Ø 80 mm - 315 mm, see item numbers below
Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.
| ø A (mm) | Angle degree | Center line radius | Material | T mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|---|
| 80 | 90 | 1.5 | Galv | 0,9mm | 1,53 | 8210002500 |
| 100 | 90 | 1.5 | Galv | 0,9mm | 1,43 | 8210002505 |
| 120 | 90 | 1.5 | Galv | 0,9mm | 1,76 | 8210002510 |
| 125 | 90 | 1.5 | Galv | 0,9mm | 1,76 | 8210002515 |
| 140 | 90 | 1.5 | Galv | 0,9mm | 2,02 | 8210002520 |
| 150 | 90 | 1.5 | Galv | 0,9mm | 2,1 | 8210002525 |
| 160 | 90 | 1.5 | Galv | 0,9mm | 2,1 | 8210002530 |
| 180 | 90 | 1.5 | Galv | 0,9mm | 2,39 | 8210002535 |
| 200 | 90 | 1.5 | Galv | 0,9mm | 4,24 | 8210002540 |
| 225 | 90 | 1.5 | Galv | 0,9mm | 4,8 | 8210002545 |
| 250 | 90 | 1.5 | Galv | 0,9mm | 5,36 | 8210002550 |
| 300 | 90 | 1.5 | Galv | 0,9mm | 7,5 | 8210002555 |
| 315 | 90 | 1.5 | Galv | 0,9mm | 7,87 | 8210002560 |
It looks like you're coming from United States.
Would you like to go to the United States site?