Nordfab FLI Flanged Pressed Bend (45°) comes with pre-drilled, loose FLI flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab's FLI Flanged Pressed Bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. Available in galvanised steel construction, ranging from 80 mm to 315 mm in diameter.
- Also available in 90°, 60°, 30° and 15° angles.
- Radius = 1.5 x D
- Available in sizes Ø 80 mm - 315 mm, see item numbers below
Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.
| ø A (mm) | Angle degree | Center line radius | Material | T mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|---|
| 80 | 45 | 1.5 | Galv | 0,9mm | 1,04 | 8210002498 |
| 100 | 45 | 1.5 | Galv | 0,9mm | 1,14 | 8210002503 |
| 120 | 45 | 1.5 | Galv | 0,9mm | 1,31 | 8210002508 |
| 125 | 45 | 1.5 | Galv | 0,9mm | 1,28 | 8210002513 |
| 140 | 45 | 1.5 | Galv | 0,9mm | 1,18 | 8210002518 |
| 150 | 45 | 1.5 | Galv | 0,9mm | 1,55 | 8210002523 |
| 160 | 45 | 1.5 | Galv | 0,9mm | 1,55 | 8210002528 |
| 180 | 45 | 1.5 | Galv | 0,9mm | 1,98 | 8210002533 |
| 200 | 45 | 1.5 | Galv | 0,9mm | 3,05 | 8210002538 |
| 225 | 45 | 1.5 | Galv | 0,9mm | 3,35 | 8210002543 |
| 250 | 45 | 1.5 | Galv | 0,9mm | 4,02 | 8210002548 |
| 300 | 45 | 1.5 | Galv | 0,9mm | 5,5 | 8210002553 |
| 315 | 45 | 1.5 | Galv | 0,9mm | 5,63 | 8210002558 |
It looks like you're coming from United States.
Would you like to go to the United States site?