Nordfab FLI Flanged Pressed Bend (15°) comes with pre-drilled, loose FLI flanges at each end for ease of alignment and connection to other ducting components during installation. Nordfab's FLI Flanged Pressed Bends allow airflow direction change in a run of a duct and are being used in process ventilation, dust collection, and fume extraction systems. Available in galvanised steel construction, ranging from 80 mm to 315 mm in diameter.
- Also available in 90°, 60°, 45° and 30° angles.
- Radius = 1.5 x D
- Available in sizes Ø 80 mm - 315 mm, see item numbers below
Nordfab flanged ductwork is typically used for larger diameters and used in high-pressure industrial ventilation systems where airtight connections are essential.
| ø A (mm) | Angle degree | Center line radius | Material | T mm | Weight(kg) | Item No. |
|---|---|---|---|---|---|---|
| 80 | 15 | 1.5 | Galv | 0,9mm | 0,1 | 8210000174 |
| 100 | 15 | 1.5 | Galv | 0,9mm | 0,96 | 8210002501 |
| 120 | 15 | 1.5 | Galv | 0,9mm | 1,01 | 8210002506 |
| 125 | 15 | 1.5 | Galv | 0,9mm | 1,01 | 8210002511 |
| 140 | 15 | 1.5 | Galv | 0,9mm | 1,76 | 8210002516 |
| 150 | 15 | 1.5 | Galv | 0,9mm | 0,99 | 8210002521 |
| 160 | 15 | 1.5 | Galv | 0,9mm | 1,01 | 8210002526 |
| 180 | 15 | 1.5 | Galv | 0,9mm | 1,2 | 8210002531 |
| 200 | 15 | 1.5 | Galv | 0,9mm | 2,35 | 8210002536 |
| 225 | 15 | 1.5 | Galv | 0,9mm | 3 | 8210002541 |
| 250 | 15 | 1.5 | Galv | 0,9mm | 2,86 | 8210002546 |
| 300 | 15 | 1.5 | Galv | 0,9mm | 3,5 | 8210002551 |
| 315 | 15 | 1.5 | Galv | 0,9mm | 4,09 | 8210002556 |
It looks like you're coming from United States.
Would you like to go to the United States site?