The Product Specification information below may highlighted, then copied and pasted into your favorite document application as needed.

GENERAL ENGINEERING SPECIFICATIONS FOR NORDFAB QUICK-FIT

DUCTWORK:

All ductwork shall be of a clamp- together design using a die-formed, rolled edge, which is then joined together by a single lever clamp of similar material. All clamp together ducting shall be of continuous laser welded construction along the longitudinal seam of the rolled form duct. All connections shall have a nitrile seal in clamp for standard installs and a Gortex seal for mist or food grade applications.

Duct material sheet blanks are five feet long, which is then rolled and fused together with a laser weld process along the longitudinal seam.

The ends of the duct are then pressed in a die to form a rolled bead on each end of the duct. This rolled end is used for clamping components together as well as reinforcement every 5 feet.

COMPONENT MATERIAL:

Straight duct and other connecting components to be constructed of galvanized sheets produced by the continuous galvanizing process which conforms to ASTM-A-527, and commercial quality ASTM A-527. Galvanized sheeting is produced with a minimum spangle with coating weight of G-90.

Ducting constructed of stainless steel to be 304 2B finish (2B finish is annealed, pickled and bright cold rolled)

Click here for Product Installations.

Click here for Product Catalog.

Click here for Technical Manual.

Click here for Other Literature.

[top]