clamp_qf

QF Duct Pipe Clamps with ePTFE seal

The Quick-Fit Clamp provides quick and easy connections for Nordfab’s Quick-Fit Duct Pipe. Specify clampls with ePTFE seals for applications requiring higher temperatures (up to 600° F. Reference the QF Clamp Technical Data sheet for temperature range information so you can choose the best clamp for your application).

Clamps are provided with ePTFE gasket seals and a bridge pin for locking the clamp into the closed position. Galvanized supplied with galvanized bridge pin. SS supplied with SS bridge pin.

ePTFE seals are placed in clamps at Nordfab factories. For international orders, seals can be shipped loose.

 

3″ to 6″ Clamps : Small bridge pin with 3/8″ wide ePTFE seal from factory.

 

7″ to 11″ Clamps: Large bridge pin with 1/2″ wide ePTFE seal from factory.

 

12″ to 24″ Clamps: Large bridge pin with 5/8″ wide ePTFE seal from factory.

 

Seals stocked in rolls of 100′.

SKU: 3260-XXXX. Category: .

Product Description

QF Clamps with ePTFE seal
Ø PART NO. WEIGHT (GALV)
3” 3260-0300 0.26
4” 3260-0400 0.28
5” 3260-0500 0.31
6” 3260-0600 0.33
7” 3260-0700 0.54
8” 3260-0800 0.59
9” 3260-0900 0.63
10” 3260-1000 0.68
11” 3260-1100 0.70
12” 3260-1200 1.32
13” 3260-1300 1.38
14” 3260-1400 1.48
15” 3260-1500 1.53
16” 3260-1600 1.60
17” 3260-1700 1.67
18” 3260-1800 1.77
20” 3260-2000 1.92
22” 3260-2200 2.04
24” 3260-2400 2.20
ADDITIONAL PINS
LARGE BRIDGE PINS 3260-0150-100000 (10)    .33
SMALL BRIDGE PINS 3260-0200-100000 (10)    .11
ADDITIONAL ePTFE SEALS
 3” – 6” 3260-0000-SG3000 0.01
 7” – 11” 3260-0000-SG4000 0.02
 12” – 24” 3260-0000-SG.650 0.02

Nordfab_sample_photo

Watch Video